5 m COB LED Strip – Colour Effects, USB & RF Remote

Bring colour into your space: this 5 m COB LED strip adds a continuous line of light to your desk, shelves, display cabinet or TV area. Use the RF remote to choose a fixed colour or a changing effect, then adjust brightness and speed to suit the mood.

• 5 m for your lighting idea: a narrow, flexible COB strip with a 5 mm width according to the packaging.
• Colour to suit your mood: 7 fixed colours and 420 effects according to the included remote instructions.
• Direct RF remote control: switch on and off, select a mode and adjust brightness and effect speed.
• 5 V USB connection: cable with inline controller and three-pin connector; rated IP20 for dry indoor spaces.

Your space. Your light.

Everyday spaces, with a different atmosphere

Behind a monitor shelf, beneath a shelf or inside a display cabinet: the slim LED strip adds decorative light to your furniture. Behind a television or hallway mirror, it can cast a coloured halo onto the wall. It can also highlight the dry outer frontage of a shop or café counter.

For your desk and living space

Choose a fixed colour for a calm accent or a changing effect for a bolder look. Keep the remote within reach; an app connection is not part of the described controls for this set.

For shelves, display cabinets and mirrors

Plan the installation so the light shows well and cables can be routed discreetly. The images illustrate design ideas and possible colour effects; they are not a fixed preset or a promise of identical brightness in every room.

How to set up your COB LED strip

1. Plan the position: check the available length and the route to your power supply. Choose a smooth, clean and dry surface.
2. Mount the strip: use the adhesive backing to attach it. Guide the strip gently; do not crease it sharply or press it over a sharp edge.
3. Connect it: connect the three-pin plug to the supplied controller, following its markings. Then connect to a suitable 5 V USB power supply; check the set’s connection information for the required power capacity.
4. Set the lighting: switch on with the RF remote, choose a colour or mode and adjust brightness and effect speed. Use AUTO for automatic effect changes.

Only shorten the strip at the marked cutting points. The spacing between these points is not specified here. Cut-off sections require suitable additional connections before they can be used separately.

Technical details

What is included?

1 × 5 m COB LED strip on a reel; 1 × USB cable with inline controller; 1 × RF remote; 1 × remote instruction leaflet. The strip has adhesive backing. A suitable 5 V power supply is required for operation.

Furniture, television, mirror, vessels and other decorations shown in the application images are not included. The product and application images are illustrative.

Frequently asked questions

Is this a neon light rope?

It is a narrow, flat COB LED strip. Its emitting surface creates a continuous line of light; the strip is not a thick, round neon rope.

Can I change the colour and brightness?

Yes. The RF remote provides fixed colours, effect modes and buttons for brightness and effect speed. The included instructions also explain how to pair the remote with the controller.

Is the LED strip waterproof?

No. Its stated IP20 rating does not provide water protection. Use the set in dry indoor spaces, away from outdoor or wet locations.

Can I shorten the strip?

The packaging states that it can be cut at the marked cutting lines. Check the markings before cutting and avoid pressure, sharp folds and crushed sections.

Questions about your lighting idea? Contact DelyMe. You can also read our shipping information and withdrawal and returns policy.